Panasonic KX-TG2248S - 2.4 GHz Digital Cordless Phone Answering System Скачать руководство пользователя страница 24

Страница: 24 / 68

Making Calls

To adjust the receiver/speaker volume while talking

3 levels (HIGH, MEDIUM and LOW) are available for the receiver and 6 levels for
the speaker.

To increase volume, press

[

]

To decrease volume, press

[

]

• The display shows the current volume setting.
• If you try to increase/decrease volume when it is at

the maximum/minimum level, the handset will beep
3 times.

Backlit LCD display

The lighted display of the handset will stay on for a few seconds after pressing a
button or lifting the handset off the base unit.

Lighted handset keypad

The dialing buttons will light when you press a button or lift the handset off the base
unit. The light will go out after a few seconds.

Answering Calls

When a call is received, the unit rings and “

Incoming call

” is displayed, and the

Ringer indicator on the handset and the IN USE/CHARGE indicator on the base
unit flash rapidly. If you subscribe to a Caller ID service, see page 25.

• When the ringer volume is set to OFF, the unit will not ring (p. 17).

Press

[

]

[

]

• You can also answer a call by

pressing any button except

[

]

[

]

and

[OFF]

To hang up, press

[OFF]

or place

the handset on the base unit.

Auto Talk:

If you set the Auto Talk feature to ON (p. 15), you can answer a call by
lifting the handset off the base unit.

Ex. Receiver volume: High

Speaker volume: level 6

Volume
Low

High

CH Hold

Handset

[

]

[OFF]

[

]

Ringer Indicator

Содержание KX-TG2248S - 2.4 GHz Digital Cordless Phone Answering System





































































Результаты поиска

Содержание KX-TG2248S - 2.4 GHz Digital Cordless Phone Answering System

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KX-TG2248S - 2.4 GHz Digital Cordless Phone Answering System, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2248S - 2.4 GHz Digital Cordless Phone Answering System

Отзывы:

Бренды по названию

Популярные бренды