Panasonic KX-tg2248CS Скачать руководство пользователя страница 59

Страница: 59 / 64

Troubleshooting

Useful Inf

ormation

The unit does not announce
the displayed caller’s name.

• The handset and base unit ringer volumes are

OFF (p. 18).

• The Talking Call Display feature is OFF

(p. 16).

The unit does not announce
the displayed caller’s name
properly.

• Name pronunciation may vary.
• The unit will announce each letter of

abbreviations, such as Co., Inc., etc.

• Call Display service supports names of up to

15 letters. If the caller’s name has more than
15 letters, the name will not be announced
correctly.

Previously programmed
information is erased.

• If a power failure occurs, programmed

information may be erased. Reprogram if
necessary.

“

Recharge battery

” is

displayed, “

” flashes or

the unit beeps intermittently.

• Charge the battery fully (p. 9).

You charged the battery fully,
but “

Recharge battery

” is

still displayed and/or “

”

continues to flash.

• Clean the charge contacts and charge again

(p. 10).

• Install a new battery (p. 8).

The IN USE/CHARGE
indicator light does not go out
after the battery has been
charged.

• This is normal.

Problem

Cause & Remedy

✿✤✦✪✤✧✮✩❇ ✬

Содержание KX-tg2248CS

































































Результаты поиска

Содержание KX-tg2248CS

Отзывы:

Похожие инструкции для KX-tg2248CS

Бренды по названию

Популярные бренды

Panasonic KX-tg2248CS, Руководство по эксплуатации

Результаты поиска

Содержание KX-tg2248CS

Отзывы:

Похожие инструкции для KX-tg2248CS

Бренды по названию

Популярные бренды