Panasonic KX-tg2248CS Скачать руководство пользователя страница 58

Страница: 58 / 64

Troubleshooting

General

You cannot operate the
Answering System with the
base unit.

• The handset user is operating the Answering

System, or is on the phone. Wait until the
IN USE/CHARGE indicator light goes out.

You cannot operate the
Answering System from a
touch tone phone.

• Make sure you enter the correct remote code

(p. 50).

• The Answering System may not respond if the

tones are too short to activate the unit. Press
each button firmly.

• The Answering System is off. Turn it on

(p. 52).

You cannot operate the
Answering System with the
handset.

• Someone is operating the Answering System.
• You are too far from the base unit. Walk closer

to the base unit.

• The unit is recording a message. To answer

the call, press

[

]

[

]

While recording a greeting
message, the unit starts to
ring and stops recording.

• To answer the call, press

[

]

[

]

. Try

again from the beginning after hanging up.

During playback, the unit
starts to ring and stops
playback.

• To answer the call, press

[

]

[

]

. To

resume playback, press

[MESSAGE/SLOW

TALK]

after hanging up.

Call information is not
displayed during message
playback (p. 47).

• Call information will not be displayed

— if a message is recorded by using

[MEMO/2WAY REC]

(p. 49), or

— if the Caller List is renewed and the Caller

List item is erased (p. 29).

Problem

Cause & Remedy

The unit does not work.

• Check the settings (p. 8–10).
• Check whether the dialing mode setting is

correct (p. 14).

• Charge the battery fully (p. 9).
• Clean the charge contacts and charge again

(p. 10).

• Install the battery properly (p. 8).
• Place the handset on the base unit and

unplug the AC adaptor to reset it. Plug in, and
try again.

• Re-install the battery (p. 8) and charge it fully.

Problem

Cause & Remedy

✿✤✦✪✤✧✮✩❇ ✫

Содержание KX-tg2248CS

































































Результаты поиска

Содержание KX-tg2248CS

Отзывы:

Похожие инструкции для KX-tg2248CS

Бренды по названию

Популярные бренды

Panasonic KX-tg2248CS, Руководство по эксплуатации

Результаты поиска

Содержание KX-tg2248CS

Отзывы:

Похожие инструкции для KX-tg2248CS

Бренды по названию

Популярные бренды