background image

2

Accessories 

(included)

For extra orders, call 1-800-332-5368.

AC Adaptor (p. 11)

Order No. PQLV1Z

(PQLV1)

one

Telephone Line Cord
(p. 11)

Order No. PQJA10075Z

one

Battery (p. 12, 59)

Order No.
N4HKGMA00001
(P-P511)

one

Wall Mounting
Adaptor (p. 56)

Order No.
PQKL10035Z1

one

Belt Clip (p. 58)

Order No.
PQKE10341Z3

one

Handset Cover 
(p. 12, 59)

Order No.
PQKK10127Z8

one

Thank you for purchasing your new Panasonic cordless telephone.

Please read IMPORTANT SAFETY INSTRUCTIONS on page
65 before use. Read and understand all instructions.

Attach your purchase receipt here.

Caller ID and Call Waiting Service and Voice Mail Service, where available,
are telephone company services. After subscribing to Caller ID, this phone will
display a caller’s name and phone number. Call Waiting Caller ID, which
displays a second caller’s name and phone number while the user is on the
phone line with the first caller, requires a subscription to both Caller ID with
Name and Call Waiting Service. After subscribing to Voice Mail Service, this
phone’s VM indicator will flash when there are new messages left in the voice
mail box at phone company.

Energy Star:

As an 

E

NERGY 

S

TAR

®

Partner, Panasonic

has determined that this product meets the

E

NERGY 

S

TAR guidelines for energy

efficiency. 

E

NERGY 

S

TAR is a U.S.

registered mark.

Содержание KX-TG2239B









































































Отзывы: