manualshive.com logo in svg

Panasonic KX-TG2219B, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-TG2219B Скачать руководство пользователя страница 58

58

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these
instructions.
1. Use only the battery(ies) specified.
2. Do not dispose of the battery(ies) in a fire. They may explode. Check

with local waste management codes for special disposal instructions.

3. Do not open or mutilate the battery(ies). Released electrolyte is

corrosive and may cause burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.

4. Exercise care in handling batteries in order not to short the battery to

conductive materials such as rings, bracelets, and keys. The battery
and/or conductor may overheat and cause burns.

5. Charge the battery(ies) provided with or identified for use with this

product only in accordance with the instructions and limitations
specified in this manual.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE. 

•

The AC adaptor is used as the main disconnect device, ensure that the
AC outlet is located/installed near the unit and is easily accessible.

Important Safety Instructions

Содержание KX-TG2219B

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды