Making/Answering Calls
18
Answering calls using the
handset
1
Lift the handset and press
{C}
or
{s}
when the unit rings.
L
You can also answer a call by pressing
any dial key from
{
0
}
to
{
9
}
,
{*}
,
{
#
}
,
or
{
INT
}
.
(Any key answer feature)
2
When finished talking, press
{ih}
or
place the handset on the base unit.
Auto talk feature
You can answer calls simply by lifting the
handset off the base unit. You do not need to
press
{C}
. To turn this feature on, see
page 29.
To adjust the ringer volume when an
outside call comes in
Press
{e}
or
{v}
when an outside call
comes in.
Note:
L
The ringer volume cannot be adjusted if
the handset is on the base unit.
Answering calls using the
base unit
1
Press
{s}
.
2
When finished talking, press
{s}
.
To adjust the ringer volume
Press
{
>
}
or
{
<
}
when a call is received or
when the base unit is in standby mode. 4
volume levels (high/medium/low/off) are
available. To turn the ringer volume off,
press and hold
{
<
}
until the base unit
beeps. To turn the ringer volume on again,
press
{
>
}
.
Note:
L
When the ringer volume is turned off,
U
is
displayed on the base unit (KX-TG1233
only).
L
When the ringer volume is turned off, the
base unit will not ring for outside calls and
it will ring at the low level for intercom
calls.
L
When the message alert feature is on
(page 45), the base unit will beep even if
the ringer volume is turned off (KX-
TG1233 only).
To change ringtones
You can change the ringtone used by the
base unit.
KX-TG1223 users:
Press
{<}
or
{>}
repeatedly to select the
desired ringtone.
KX-TG1233 users:
1
Press
{
>
}
or
{
<
}
when the base unit is
in standby mode.
2
Press
{
<
}
or
{
>
}
repeatedly to
select the desired ringtone, then press
{
5
}
.
TG1223-1233BX(e-e).book Page 18 Wednesday, November 15, 2006 3:32 PM
