Useful Information
40
For assistance, please visit http://www.panasonic.com/help
Wall mounting
Base unit
1
Connect the AC adaptor and telephone line
cord. Tuck the telephone line cord inside the
wall mounting adaptor, then push it in the
direction of the arrow.
L
The word “UP” should face upward.
2
Connect the telephone line cord. Mount the
unit by inserting the mounting pins into the
round openings on the adaptor (for pin
2
, use
the round cut out at the bottom of the adaptor
if you are using the 4 inch phone plate), then
slide the unit down to secure it. Connect the
AC adaptor to power outlet (page 8).
L
There are 2 common types of wall phone
plates. The distance between
1
and
2
may vary depending on the size of the wall
phone plate installed.
Charger
1
Drive the screws (not supplied) into the wall.
2
Mount the charger (
A
), then slide it down (
B
)
and to the right (
C
) until it is secure.
Belt clip
■
To attach
■
To remove
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
TG106x(e).book Page 40 Friday, January 16, 2009 10:45 AM
