Panasonic KX-TDE100, Руководство по функциям

Страница: 250 / 392

•
A flexible button cannot be customized as a Message Waiting button for another extension at a different
PBX.
•
Whether or not Enhanced QSIG information is transmitted can be set in the TIE table.
•
When PBXs are connected by PRI23 cards, the card must be set to ISDN Standard mode. If set to T1
mode, the card must be removed and reinstalled to allow the mode to be changed. When the card is
reinserted into the PBX, it is possible to choose whether the card will be set to T1 mode or ISDN Standard
mode. The default is ISDN Standard.
•
PBX Code Method
The number used in this method must be no more than 8 digits.
•
When using a mailbox number containing more than 5 digits, the version of the KX-TVA series VPS must
be 2.1 (Main Software Version 2.50) or later.
•
Transfer to Mailbox
It is possible to transfer calls to a mailbox of a VPS at another PBX, by creating a flexible button containing
the following:
[T] + extension number of VPS at other PBX + [P] + [#] + 6
Then, the extension user can transfer calls to a mailbox by pressing this key, entering the mailbox number,
and going on hook.
•
The VM Menu feature cannot be used in a Centralized Voice Mail network. When extensions belonging to
a PBX that is not connected to the VPS have a mailbox in the VPS, the VM Menu feature should be disabled
for the mailbox using the Class of Service (COS) setting of the VPS. Otherwise, there may be an answering
delay of about 6 seconds.
PC Programming Manual References
3.48 [1-3] Option— New Card Installation—ISDN Standard Mode for PRI23 Card
11.1 [9-1] TIE Table—Centralized VM
11.2 [9-2] Network Data Transmission
→ Network MSW Data Transmission for Centralized VM Feature—Data Re-transmission : Repeat
Counter
→
Network MSW Data Transmission for Centralized VM Feature—Data Re-transmission : Repeat Timer
13.1 [11-1] Main—Maintenance
→ Error Log for Centralized VM—Network MSW Transmission (Counter)
→ Error Log for Centralized VM—Network MSW Transmission (Buffer)
Feature Manual References
13.1.15 PRIVATE NETWORK FEATURES
19.1.4 Voice Mail DPT (Digital) Integration
13.1.17 Private Network Features—NDSS (Network Direct Station
Selection)
Description
When PBXs are networked using ISDN or IP-GW cards, it is possible to assign flexible buttons as Network
Direct Station Selection (NDSS) buttons. These buttons are used to monitor the status of extensions connected
to up to seven other PBXs in the network, and to make or transfer calls to those extensions with one touch,
like normal DSS buttons. This allows operator functions to be centralized even when there are offices in remote
locations.
NDSS buttons show the status of the monitored extension as follows:
250 Feature Manual Document Version 2009-12
13.1.17 Private Network Features—NDSS (Network Direct Station Selection)