Panasonic KX-TDA30, Руководство по установке

Страница: 147 / 264

Using the KX-TD7590
Select
"DECT-SYS1-4"
Choose
"ENABLE/DISABLE".
System Lock Password
System Lock Password
Press POWER
for 5 seconds.
4 digits
4 digits
ENABLE
F
/
/
SELECT
SELECT
SELECT
/OK
/OK
To set system lock
F
DISABLE
OR
To register for the first time
To re-register
/
Select
"INITIAL SETTING".
SELECT
/
Select
"PS-PROGRAM".
SELECT
/
Select "DECT-
SYS SETTING".
SELECT
4 digits
If required
/OK System Lock Password
Select
"REGISTRATION".
/
4 digits
PIN for
PS Registration
/OK
C.Tone
Using the KX-TD7580
/
Select
"Setting Handset".
Select
"Register H/set".
Select
"Registration".
Select
"Base 1–4".
Press POWER
for 2 seconds.
/
/
/
C.Tone
4 digits
PIN for
PS Registration
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong PBX, a PIN for PS registration can be set to the PBX. Before registering
the PS to the PBX, enter the PIN set to the PBX into the PS. By doing so, the PS will only be registered to the
PBX with the matching PIN.
Note
•
By default, the PIN for PS registration is "1234" for both the PBX and PS. Therefore, the PS can be
registered to the PBX without setting the PIN.
•
The PIN for PS registration will only be used when registering the PS to the PBX. Therefore, during
normal operation after registration, even if there is more than 1 PBX with the same PIN near the PS,
the PS will not be inadvertently linked to a different PBX.
Setting the PIN for PBX
[692]
4 digits
PIN for PS Registration
ENTER ENTER
1234
END
(HOLD)
Installation Manual 147
2.7.7 Connecting a Cell Station to the PBX