manualshive.com logo in svg

Panasonic KX-TDA150, Руководство пользователя

Panasonic KX-TDA150 - мощная бизнес-система, которая обеспечивает надежную связь в офисе. Скачайте бесплатно Руководство по программированию на manualshive.com и ознакомьтесь с возможностями этой телефонной станции для оптимизации работы вашего офиса.

Поделиться
Скачать
background image

•

Do not dispose of batteries in a fire, as they may explode. Dispose according to local regulations.

CAUTION

SAFETY REQUIREMENTS

For All Telephone Equipment

•

The product should be kept free of dust, moisture, high temperature (more than 40 °C), and vibration, and
should not be exposed to direct sunlight.

•

Unplug the product from the wall outlet before cleaning. Wipe the product with a soft cloth. Do not clean
with abrasive powders or with chemical agents such as benzene or thinner. Do not use liquid cleaners or
aerosol cleaners.

For the PBX

•

When relocating the equipment, first disconnect the telecom connection before disconnecting the power
connection. When the unit is installed in the new location, reconnect the power first, and then reconnect
the telecom connection.

•

The power supply cord is used as the main disconnect device. Ensure that the AC outlet is located near
the equipment and is easily accessible.

•

Slots and openings in the front, back and bottom of the cabinet are provided for ventilation; to protect it
from overheating, these openings must not be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar surface while in use. The product should never
be placed near or over a radiator or other heat source. This product should not be placed in a sealed
environment unless proper ventilation is provided.

•

When this product is no longer in use, make sure to detach it from the wall.

•

To protect this unit from static electricity, do not touch any external connectors of the unit.

SECURITY REQUIREMENTS

In order to use the PBX safely and correctly the Security Requirements below must be observed. Failure to do
so may result in:

•

Loss, leakage, falsification or theft of user information.

•

Illegal use of the PBX by a third party.

•

Interference or suspension of service caused by a third party.

What is User Information?

User Information is defined as:

1.

Information stored on the SD Memory Card:
Phonebook data, user IDs, system settings data, passwords (User/Administrator/Installer), Personal
Identification Numbers (PINs), etc.

2.

Information sent from the PBX to a PC or other external device:
Phone call data (including telephone numbers of outside parties), call charge data, etc.

Requirements

1.

The SD Memory Card contains software for all the processes of the PBX and all customer data. It can be
easily removed and taken away from the PBX by a third party. Therefore, do not allow unauthorised access
to prevent data leakage.

2.

Always make backups of data stored on the SD Memory Card. For details, consult your dealer.

3.

To prevent illegal access from the Internet, activate a Firewall.

4.

To avoid unauthorised access and possible abuse of the PBX, we strongly recommend:

a.

Keeping the password secret.

b.

Selecting a complex, random password that cannot be easily guessed.

c.

Changing your password regularly.

8

User Manual

Important Information

Содержание KX-TDA150















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для KX-TDA150

Planet IPX-1900 Quick Installation Manual preview
IPX-1900
Бренд: Planet Страницы: 14
AVM FRITZ! X USB Installation Manual preview
FRITZ! X USB
Бренд: AVM Страницы: 80

Бренды по названию

Популярные бренды

Загрузить еще бренды