4.2 Creating New Group and Gateway
Getting Started
25
2.
Setup Wizard (1/6):
a.
Enter
Name
of the Gateway.
b.
Select "
BV1250G
" for "Unit", "
V1.40
" for
"Version", and "
BRIT
" for "Interface".
Note: Do not select any other value than
above.
c.
Enter
Comment
for the Gateway (if
necessary), then click [Next >].
3.
Setup Wizard (2/6):
Enter
IP Address
,
Subnet Mask
, and
Route
Address
of the Gateway, then click [Next >].
Consult your network administrator for
specific values.
4.
Setup Wizard (3/6):
Enter "
Call control signal TCP port no.
"
(default: 1720), then click [Next >].
Consult your network administrator for
specific values.
5.
Setup Wizard (4/6):
•
Check "
Use Default Password
" to accept
the default Maintenance Level Password
("
mainte
"), then click [Next >].
•
Enter and confirm the
Maintenance Level
Password
to change the default
password, then click [Next >].
Содержание KX-TDA0480
