Panasonic KX-TDA0480, Начало работы

Страница: 26 / 76

4.1 Preparations
26 Getting Started
4.1 Preparations
A web programming utility called the IP-GW4 Maintenance Utility is available for programming
of the VoIP Gateway Card.
For a complete discussion of web programming, refer to the VoIP Gateway Card Programming
Guide.
System Requirements
• The IP-GW4 Maintenance Utility requires Microsoft® Internet Explorer 5.0 or above.
Trademarks
• Microsoft is either a registered trademark or trademark of Microsoft Corporation in the
United States and/or other countries.
• All other trademarks identified herein are the property of their respective owners.
• Screen shots reprinted with permission from Microsoft Corporation.
4.1.1 Preparing the PC
To prepare for programming using the IP-GW4 Maintenance Utility, configure your PC by (1)
assigning an IP address that belongs to the same network as that of the VoIP Gateway Card,
and (2) choosing the appropriate options for the Internet properties.
Note
The procedure below is based on the Windows XP operating system as an example.
1. Open Internet Protocol (TCP/IP) Properties
from the Start menu.
2. a.
Click Use the following IP address .
b.
In the IP address box, type
192.168.1.100 .
This is an example entry for the case
when the card has the default IP address
(192.168.1.200).
c.
In the Subnet mask box, type
255.255.255.0 .
d.
Click OK .
3. a.
Start Internet Explorer from the Start
menu.
b.
Click Internet Options from the Tools
menu.