background image

4.6

CO Line Programming

ISDN Outgoing CLIR Service Assignment

419

35

Description

Assigns whether ISDN CLIR (Calling Line Identification
Restriction) service is enabled or disabled for outgoing outside
calls.  If disabled, the subscriber’s number of your system is
informed to the called party.

Selection

CO line number:

KX-TD816 – 01 through 08,

(

=all CO lines)

KX-TD1232 – 01 through 24,

(

=all CO lines)

• Enable / Disable

Default

All CO lines – Enable

Programming

1.

Enter 419.

Display: ISDN CLIR Send

2.

Press NEXT.

Display: CO Line NO?

3.

Enter a CO line number.

To enter CO line number 05 for KX-TD816 or 09 for KX-TD1232,
you can also press NEXT.

Display example: CO09:Enable

4.

Keep pressing SELECT until the desired selection is
displayed.

5.

Press STORE.

6.

To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.

7.

Repeat steps 4 through 6.

8.

Press END.

Conditions

• In the case of KX-TD1232, CO01 through CO12 are for the Master

System and CO13 through CO24 are for the Slave, if available.

• To assign all CO lines to one selection, press the 

key in step 3.  In

this case, the display shows the contents programmed for CO05 (for
KX-TD816) or CO09 (for KX-TD1232).

• Program [418] “ISDN Line Number Assignment” is used to store the

subscriber’s number of your system that is informed to the called party.

Feature References

Section 3, Features,
Calling Line Identification Restriction (CLIR) — in this manual
CO Incoming Call Information Display — in this manual

Содержание KX-TD816RUKX-TD1232RU









































































Отзывы: