Panasonic KX-TD816RUKX-TD1232RU Скачать руководство пользователя | Manualshive

Страница: 13 / 72

background image

3

Features

C

13

C

O Incoming Call Information Log

Description

If the display digital proprietary telephone (KX-T7230 or KX-
T7235) user cannot answer a call, the telephone automatically
records the caller’s telephone number, name and the time. The user
can call back the caller by checking the call log. This is available if
such a telephone receives incoming outside calls from the ISDN
line provided with the CLIP (Calling Line Identification
Presentation) feature. A maximum of 15 calls per telephone can
be logged.

Conditions

• The call log is registered at the time DPT finishes ringing. If a call is

directed to multiple DPTs, the call log is registered at the DPT that has
the smallest jack number of the ringing DPTs.

• Transferred call information is also recorded.
• If the DPT is in Call Forwarding – No Answer or IRNA is activated,

the call log is registered at the original DPT but not at the destination
DPT unless the destination party answers the call and record it
manually.

• When the information area is full (i.e. more than 15 calls), the user can

control the log mode at his / her extension (CO Incoming Call
Information Log Mode). If the user sets this mode, new CO incoming
call information is retained but old data is discarded. If the user cancels
this mode, new CO incoming call information is not entered in the unit.
To set or cancel the mode, a corresponding feature number is used.

• The telephone user can lock the display of the unit so that CO

incoming call information is not shown on the display. A lock code is
required to set or cancel this feature. Operator can cancel the lock in
case the user forgets the lock code.

Connection References

Section 2, Installation,
2.4 Installation of Optional Cards and Units (in this manual)

Programming References

Section 4, System Programming,
[001] System Speed Dialing Number Set — in this manual
[002] System Speed Dialing Name Set — in this manual
[100] Flexible Numbering, CO incoming call information log mode/CO

incoming call information log lock — in this manual

[417] CO Line Name Assignment — in this manual
[418] ISDN Line Number Assignment — in this manual
[419] ISDN Outgoing CLIR Service Assignment — in this manual

«
...
11
12
13
14
15
...
»

Содержание KX-TD816RUKX-TD1232RU









































































Отзывы:

Нет отзывов

Похожие инструкции для KX-TD816RUKX-TD1232RU

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 32

Бренд: Panasonic Страницы: 115

Бренд: Panasonic Страницы: 22

GLOBARANGE BB-GT1500E

Бренд: Panasonic Страницы: 10

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 51

OFFICESERV 500 Series

Бренд: Samsung Страницы: 124

Бренд: Samsung Страницы: 14

Бренд: Samsung Страницы: 287

Бренд: Jensen Страницы: 2

Бренд: Yealink Страницы: 48

Бренд: Yealink Страницы: 2

T46S Skype for Business

Бренд: Yealink Страницы: 3

Бренд: YAKOYA Страницы: 25

Бренд: Telos Страницы: 2

Бренд: Karel Страницы: 24

Бренд: Dickson Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды