Panasonic KX-TD816AL страница 136 Скачать руководство пользователя

Страница: 136 / 328

3-70

DPT Features

Handsfree Operation

Allows you to connect to another party without lifting the handset.

1. Press the SP-PHONE button.

• The microphone and the speaker are now

activated and handsfree operation is available.

Switching from handset to handsfree mode

1. Press the SP-PHONE button.

2. Hang up.

• Do not replace the handset without pressing the SP-PHONE

button, or the line will be disconnected.

Switching from handsfree to handset mode

1. Lift the handset.

Conditions

• Helpful hints for Handsfree operation:

— Use this unit in a quiet room for best performance.

— If the other party has difficulty hearing you, decrease the volume.

— If you and the other party speak at the same time, parts of your conversation will be

lost. To avoid this, speak alternately.

• Handsfree mode is cancelled if you do not start dialing within ten seconds.

• The KX-T7250 has a MONITOR button instead of a SP-PHONE button. It can be used for

handsfree dialing, etc., but it cannot be used for handsfree conversation.

• You can enable handsfree mode by pressing a CO or INTERCOM button.

• When "Full One-Touch Dialing" is enabled pressing One-Touch Dialing, DSS, REDIAL or

SAVE button provides handsfree mode.

Feature References

Full One-Touch Dialing

SP-PHONE

TD816 TD1232

✔

DPT (72**)

✔

3.2

DPT Features

With

Compliments

Absolute

Phone

Data

Содержание KX-TD816AL









































































































































































































































































































































Результаты поиска

Содержание KX-TD816AL

Отзывы:

Похожие инструкции для KX-TD816AL

Бренды по названию

Популярные бренды

Panasonic KX-TD816AL, Руководство пользователя

Результаты поиска

Содержание KX-TD816AL

Отзывы:

Похожие инструкции для KX-TD816AL

Бренды по названию

Популярные бренды