manualshive.com logo in svg

Panasonic KX-TD816, Руководство по эксплуатации

Поделиться
Скачать
Panasonic KX-TD816 Скачать руководство пользователя страница 91

• An optional doorphone/door opener card and doorphones are necessary for this feature.
• If you do not answer an incoming doorphone call within 15 or 30 seconds, the call will be

canceled.

• You must program the extensions which can receive calls from each doorphone for the day,

night and lunch modes.

• Any extension user can call a doorphone.
• The Call Waiting feature is not available with doorphone calls.
• Doorphone 1 and Doorphone 2 cannot receive calls simultaneously. When one is in use, an

extension user cannot have a conversation with the other. This is the same for Doorphone 3
and Doorphone 4.

• Doorphones can also be used for the Room Monitor feature.

• 1.7 Useful Features, “Room Monitor”
• See the Installation Manual, Section 3, “Doorphone Call”.

1.7

Useful Features

Operations

1-83

Advanced Operations

☞

Doorphone Call

Allows you to have a conversation with a visitor at your doorphone.
Up to 4 doorphones can be connected to the system.

Calling an extension from a doorphone

Any Doorphone

Wait for an answer and talk.

Press the Doorphone button for 1 second.

Any Telephone

Lift the handset or press SP-PHONE/MONITOR.

When you hear the doorphone ring tone at the extension:

Answering a doorphone call

Calling a doorphone

Any Telephone

Enter a doorphone number 
(1 through 4).

Dial 31.

doorphone no.

3

1

Lift the handset or press 
SP-PHONE/MONITOR.

Confirmation tone

Talk.

!

!

Technical Manuals Online! - http://www.tech-man.com

Содержание KX-TD816




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды