26
You can program the following function items using the handset near the base unit. See the
corresponding pages for function details.
Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.
Summary of Programmable Functions
Command
Function item
5
To set the base unit password (p. 27)
6
To set the call restricted handset(s) and
restriction number(s) (p. 30)
7
To cancel a handset (p. 37)
0
To clear the base unit settings (p. 33)
Command
Function item
1
To set the bell selection (p. 38)
2
To select the base unit ringer volume
(p. 15)
3
To select the dialling mode (p. 13)
To select the pause time (p. 23)
To select the earth/time break recall
mode (p. 25)
Press
G
or
F
until a desired function code is
displayed, then press
.
OK
Enter a desired function command as shown below.
<Stand-by mode>
Press then .
I N T
PROG
Press .
PROG
•
To cancel during programming, press
, then start from the beginning.
PROG
•
To return to the previous step during programming, press
.
C
- i-
Code
Function item
F1 To select the base unit access (p. 36)
F21 To set the key tone (p. 31)
F22 To select the handset ringer volume (p. 14)
F23 To select the handset ringer pattern (p. 14)
F24 To set the call waiting tone (p. 42)
F25 To set the range warning alarm (p. 31)
F26 To set the battery low alarm (p. 31)
F28 To set the auto talk feature (p. 15)
F31 To select the stand-by mode display (p. 38)
F32 To select the talk mode display (p. 32)
F33 To select the battery type (p. 43)
F41 To set the call prohibition mode (p. 29)
F42 To set the direct call number (p. 28)
F5 To set the handset password (p. 27)
F6 To select the receiver volume (p. 16)
F70 To cancel the base unit (p. 37)
F71 To register to the base unit (p. 35)
F9 To clear the redial memory (p. 17)
F0 To clear the handset settings (p. 33)
KX-TCD952EB(026~033) 00.3.30 1:40 PM Page 26
