Panasonic KX-TCD705NL Скачать руководство пользователя страница 52

Страница: 52 / 60

Before Requesting Help

➡

Problem

Cause and Remedy

“

” flashes and an alarm tone

• You are too far from the base unit. Move closer and

sounds when you

Z O

•

try again.

• Plug in the AC adaptor.
• The handset has been cancelled or has not been

registered. Register the handset in the base unit
(page 41).

• If the handset is registered to more than one base unit,

check ‘selecting the base unit access’ (page 42).

A busy tone sounds when you

• Another handset is in use.

Z O

“

” flashes during a conversation

• The handset is out of range. Move closer to the

and the call is disconnected.

•

base unit and make the call again.

• Plug in the AC adaptor.

The unit does not work.

• Turn the power ON (page 12).
• Check the settings.
• Charge the batteries fully (page 7).
• Clean the charge contacts and charge again (page 7).
• Unplug the AC adaptor and turn the power OFF to reset.

Plug in the AC adaptor and turn the power ON. Then try
again.

• Re-install the handset batteries (page 7) and try again.
• The handset has been cancelled or has not been

registered. Register the handset (pages 39, 41).

You cannot dial.

• The unit is in call prohibition mode. Cancel the mode

(page 38).

• The dialled number is restricted. Cancel the number

(page 46).

• Key lock mode is set. Cancel the mode (page 36).

Static, sound cuts in/out, fades.

• Locate the handset and base unit away from other

Interference from other electrical

•

electrical appliances.

units.

• Move closer to the base unit.

The handset does not operate

• Turn the power ON (page 12).

or ring.

• The ringer is set to OFF. Select the desired volume

level (page 37).

The base unit does not ring.

• The ringer is set to OFF. Select the desired volume

level (page 44).

30678_KX-TCD705 Dutch_a_English 22/6/01 9:22 am Page 52

Содержание KX-TCD705NL





























































Результаты поиска

Содержание KX-TCD705NL

Отзывы:

Похожие инструкции для KX-TCD705NL

Бренды по названию

Популярные бренды

Panasonic KX-TCD705NL, Руководство по эксплуатации

Результаты поиска

Содержание KX-TCD705NL

Отзывы:

Похожие инструкции для KX-TCD705NL

Бренды по названию

Популярные бренды