Panasonic KX-TCD540NZ Скачать руководство пользователя страница 110

Страница: 110 / 116

110

Before Requesting Help

Answering System

Problem

Possible cause

Solution

Page

A beep sounds when

on the

base unit is pressed.

•

Another unit in use.

•

Wait for the other user to
complete the operation.

A beep sounds when
entering caller list or base
unit phonebook with
cordless handset.

•

Another unit in use.

•

Wait for the other user to
complete the operation.

The unit picks up the wrong
voice tag.

•

Similar voice tag exists.

•

Record different voice
tag.

p. 48

Problem

Possible cause

Solution

Page

The answering system is
on, but incoming messages
are not recorded.

•

The recording time is set
to “

Greeting Only

”.

•

Memory is full (30 minutes
or 64 messages).

•

Select “

1 Minute

” or

“

No Limit

” (see

“Answering System”).

•

Erase some or all of the
messages.

p. 89

p. 93
p. 95

Cannot operate the
answering system from a
touch tone phone.

•

Incorrect remote code
entered.

•

Tone are too short to
activate the unit.

•

The answering system is
off.

•

Enter the correct remote
code.

•

Press each button firmly.

•

Turn on the answering
system.

p. 99

p. 88
p. 98

Cannot operate the
answering system with the
unit.

•

Someone is operating
the answering system.

•

Retry when other user
has finished operation.

While recording a greeting
message, the unit starts to
ring and stops recording.

•

A call is being received.

•

Answer the call. Retry
recording after
conversation is finished.

During playback, the unit
starts to ring and stops
playback.

•

A call is being received.

•

Answer the call. Retry
playback after
conversation is finished.

Содержание KX-TCD540NZ





















































































































Результаты поиска

Содержание KX-TCD540NZ

Отзывы:

Panasonic KX-TCD540NZ, Руководство по эксплуатации, Страница: 110 / 116

Результаты поиска

Содержание KX-TCD540NZ

Отзывы: