Panasonic KX-TCD540NZ Скачать руководство пользователя страница 109

Страница: 109 / 116

109

Use

ful

nfor

tio

Before Requesting Help

Problem

Possible cause

Solution

Page

Cannot dial out.

•

Call Bar mode ON.

•

Particular dialled number
is restricted.

•

Key lock mode ON.

•

Turn feature off.

•

Remove number from
call restricted list.

•

Turn key lock OFF.

p. 60
p. 75
p. 67

p. 25

Cordless handset will not
ring.

•

Ringer switched off.

•

Set ringer to one of
6 volume levels.

p. 57

Last number redial does
not work.

•

Number exceeded
24 digits.

•

Redial manually.

p. 26
p. 27

Audible Caller sounds late.

•

Recording time is long.

•

Shorten recording time.

p. 45

No Caller ID number
displayed.

•

Service not supplied.

•

Caller has withheld info.

•

Caller ID service must be
arranged with your
telephone company.

p. 30

icon flashes.

•

Battery low.

•

Recharge batteries.

p. 16

Cannot register cordless
handset to base unit.

•

Max. number of base
units already registered
to cordless handset.

•

Max. number of cordless
handsets already
registered to base unit.

•

Wrong PIN number
entered (Default 0000).

•

Electrical noise in local
area.

•

Delete unused base unit
registrations from
cordless handset.

•

Delete unused cordless
handset registrations
from base unit.

•

If PIN number is lost,
contact the Panasonic
Service Centre.

•

Move base unit/cordless
handset away from
sources of electrical
noise (e.g., TVs, radios,
etc.).

p. 78

p. 68

p. 6

The display is blank even
if the unit is charged.

•

Battery low.

•

Recharge batteries more
than about 15 minutes.

p. 16

Date and time
disappeared.

•

Power failure.

•

Set the date and time.

p. 20

Clock is slow (fast).

•

Power failure.

•

Readjust date/time from
cordless handset 1.

p. 20

Содержание KX-TCD540NZ





















































































































Результаты поиска

Содержание KX-TCD540NZ

Отзывы:

Panasonic KX-TCD540NZ, Руководство по эксплуатации, Страница: 109 / 116

Результаты поиска

Содержание KX-TCD540NZ

Отзывы: