Panasonic KX-TCD540AL Скачать руководство пользователя страница 56

Страница: 56 / 116

Handset Settings

Memo Alarm

To exit the operation, press

at any time.

Setting the Alarm Mode

“

Once

”

“

Daily

”

•

When setting the time, remember to select 12 or 24 hour clock (p. 22).

•

Memo Alarm volume depends on cordless handset ringer volume. Even if you set
ringer to off, Memo Alarm still rings.

•

The factory preset of ringer pattern is 1.

•

When in talk or intercom mode, the alarm will not sound until the call is ended.

All Handset Settings must be operated with the cordless handset.

Set the date and time before setting the memo alarm (p. 22).

Press

JOYSTICK

(or move).

Select “

Setting Handset

”.

Select “

Memo Alarm

”.

Select the desired alarm number
(1-3).

Go to step

Follow steps

shown above, then:

Select “

Once

” or

“

Daily

”.

“

Once

”: Enter date

and time.

“

Daily

”: Enter time.

Press

JOYSTICK

Enter a memo
message (max.
32 characters), then
press

JOYSTICK

Select the desired
ringer pattern.

Select “

Save

”, then

“

Saved

” is displayed.

540AL.book 56 ページ２００３年９月１６日火曜日午前９時１５分

Содержание KX-TCD540AL





















































































































Результаты поиска

Содержание KX-TCD540AL

Отзывы:

Panasonic KX-TCD540AL, Руководство по эксплуатации, Страница: 56 / 116

Результаты поиска

Содержание KX-TCD540AL

Отзывы: