Panasonic KX-TC1851B - 900 MHz DSS Cordless Phone Скачать руководство пользователя

Страница: 53 / 56

Useful Information

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these
instructions.
1. Use only the battery(ies) specified.
2. Do not dispose of the battery(ies) in a fire. They may explode. Check

with local waste management codes for special disposal instructions.

3. Do not open or mutilate the battery(ies). Released electrolyte is

corrosive and may cause burns or injury to the eyes or skin. The
electrolyte may be toxic if swallowed.

4. Exercise care in handling batteries in order not to short the battery to

conductive materials such as rings, bracelets, and keys. The battery
and/or conductor may overheat and cause burns.

5. Charge the battery(ies) provided with or identified for use with this

product only in accordance with the instructions and limitations
specified in this manual.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

PQQX12623YA-BM5-改訂 03.5.16 7:28 PM ページ 53

Содержание KX-TC1851B - 900 MHz DSS Cordless Phone

























































Результаты поиска

Содержание KX-TC1851B - 900 MHz DSS Cordless Phone

Отзывы:

Похожие инструкции для KX-TC1851B - 900 MHz DSS Cordless Phone

Бренды по названию

Популярные бренды

Panasonic KX-TC1851B - 900 MHz DSS Cordless Phone, Руководство по эксплуатации

Результаты поиска

Содержание KX-TC1851B - 900 MHz DSS Cordless Phone

Отзывы:

Похожие инструкции для KX-TC1851B - 900 MHz DSS Cordless Phone

Бренды по названию

Популярные бренды