“
37
Advanced Operation
1
Press
(REDIAL/PAUSE/FUNCTION)
.
2
While the arrow points to “
Save
directory
”, press
EDIT
(fl)
.
≥
The display shows the number of stored items
in the directory.
3
Enter a name, up to 15 characters, with the
dialing buttons,
CH
(fi)
or
EDIT
(fl)
.
≥
See the steps for entering names and symbols
(p. 38).
≥
If a name is not required, press
(›)
(
Next
key) and go to step 5.
4
Press
(›)
(
Next
key).
5
Enter a phone number, up to 22 digits.
≥
Each time you press
(HOLD/CLEAR)
, a
character is erased from the right. To erase all
of the digits, press and hold
(HOLD/CLEAR)
.
6
Press
(›)
(
Next
key).
7
Press
EDIT
(fl)
(
Save
key).
≥
A beep sounds.
≥
To continue storing other items, repeat from step 2.
≥
To return to the standby mode, press
(OFF)
.
≥
If a pause is required for dialing,
(REDIAL/PAUSE/FUNCTION)
can be stored in
a phone number counting as one digit (p. 51) in step 5.
≥
You can exit the programming mode any time by pressing
(OFF)
.
≥
If the display shows “
Directory full
” in step 2, the display will return to
step 1. Press
(OFF)
to exit the list. To erase other stored items from the
directory, see page 43.
≥
If the display shows “
Save error
” or an alarm tone sounds in step 7, the item
cannot be stored in the directory. Try again from step 1.
Enter name
Tom Jones
21
4
=Next
Directory=
20 items
Enter name
21
4
=Next
Enter phone no.
Program
1
Save directory
Ringer volume
0987654321
21
4
=Next
Tom Jones
0987654321
3
=Edit
1
=Save
PQQX13225ZA-BM-4 01.7.17 8:57 AM y [ W 37
