4
Special Features
Section 4
Press
(FLASH/CALL–WAIT)
if you hear a call-waiting tone while talking.
≥
The first call is put on hold and you can answer the second call.
≥
To return to the first caller, press
(FLASH/CALL–WAIT)
again.
≥
The call waiting service cannot be used when a parallel connected
telephone is in use.
≥
If this function does not operate properly, consult your telephone company
for details.
4-A For Call Waiting Service Users
4-B Automatic Security Code Setting
Press
(TONE)
before entering access numbers which require tone dialing.
≥
The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up,
the mode will return to pulse.
≥
Access numbers entered after pressing
(TONE)
will not be included when
redialing.
Each time you place the handset on the base unit, the unit automatically
selects one of more than a million security codes. These codes help prevent
the unauthorized use of your telephone line by another cordless telephone
user.
4-C Temporary Tone Dialing
(For Rotary or Pulse Service Users)
4-E Handset Locator
You can locate the handset or page the handset user with beep tones.
1
Press
(HANDSET\LOCATOR)
on the base unit.
≥
The PAGING indicator on the handset and the
IN USE/CHARGE/HOLD indicator on the base unit flash and the
handset beeps for 1 minute.
2
To stop paging, press
(HANDSET\LOCATOR)
again or
press and
(OFF)
on the handset.
(–––)
4-D How to Use the PAUSE Button
(For Analogue PBX Line/Long Distance Service Users)
We recommend that you press
(REDIAL/PAUSE/PROGRAM)
if a pause is
required for dialing with a PBX or to access a long distance service.
e.g. Line access number
(9)
(PBX)
(9)
¤
(REDIAL/PAUSE/PROGRAM)
¤
≥
Pressing
(REDIAL/PAUSE/PROGRAM)
once creates a 3.5 second pause.
This prevents misdialing when you redial or dial a stored number.
≥
Pressing
(REDIAL/PAUSE/PROGRAM)
more than once increases the length
of the pause between numbers.
Phone number
Pressing
(FLASH/CALL–WAIT)
allows you to use special features of your
host PBX such as transferring an extension call or accessing special
telephone services (optional), such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. You can
select the following flash times: “90, 100, 110, 250, 300, 400, 600, 700 ms
(milliseconds)”, using the handset near the base unit. Your phone comes
from the factory set to “700 ms”.
The TALK indicator light must be off before programming.
Press
(REDIAL/PAUSE/PROGRAM)
¤
Dialing button (
(1)
to
(8)
)
¤
(1)
: 90 ms
(2)
: 100 ms
(3)
: 110 ms
(4)
: 250 ms
(5)
: 300 ms
(6)
: 400 ms
(7)
: 600 ms
(8)
: 700 ms
¤
AUTO
(fl)
¤
(FLASH/CALL–WAIT)
.
≥
If 3 beeps sound during programming, the handset is too far from the
base unit. Move closer to the base unit or place the handset on the base
unit. Start again from the beginning.
≥
If the unit is connected via a PBX, PBX functions (transferring a call etc.)
might not work correctly. Consult your PBX installer for the correct setting.
4-F FLASH Button
(REDIAL/PAUSE/PROGRAM)
(FLASH/CALL\WAIT)
(TONE)
(HANDSET–LOCATOR)
IN USE/CHARGE/HOLD
Indicator
PAGING Indicator
PQQX13368ZA-BM 02.2.4 11:33 AM ページ 9
