Phone Book
20
You can store up to 10 names and phone numbers in the phone book.
Using the phone book, you can make a call by selecting a name on the
handset display.
Storing Names and Numbers
Make sure the unit is in the standby mode.
1
Press
(AUTO/PROGRAM)
.
2
Press a memory station number (
(0)
to
(9)
).
≥
If an item is already stored, that information is
displayed.
3
Press
(EDIT)
.
4
Enter a name, up to 15 characters, using
the dialing buttons (
(1)
to
(9)
),
(›)
or
(‹)
.
≥
See the steps for entering names and symbols
(p. 21).
≥
If a name is not required, press
(EDIT)
and go
to step 6.
5
Press
(EDIT)
.
6
Enter a phone number, up to 24 digits.
≥
Each time you press
(MUTE/CLEAR)
, the digit
is erased from the right
. To erase all of the
digits, press and hold
(MUTE/CLEAR)
.
≥
To show the cursor, press
(›)
after entering a
digit. Each time you press
(MUTE/CLEAR)
,
the digit under the cursor is erased.
≥
When you store the last number dialed, press
(PAUSE/REDIAL)
instead of entering a phone
number.
7
Press
(EDIT)
to save.
≥
A beep sounds.
≥
The handset will return to the standby mode.
≥
If a pause is required for dialing,
(PAUSE/REDIAL)
can be stored in a phone
number counting as one digit (p. 26) in step 6.
≥
You can exit the programming mode at any time by pressing
(OFF)
.
≥
If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
EMPTY
ENTER NAME :
TOM
ENTER NUMBER :
SELECT STATION#
TOM
TOM
E-PQQX13914ZA-4 03.10.1 4:07 PM ページ20
