background image

22

1. Enter a phone number.

If you misdial, press

. Digits are erased

from the right.

To cancel, press 

(EXIT/CH)

.

2. Press

(TALK)

.

To dial after confirming the entered number

After a few seconds, the display will show the length of the call.

3. To hang up, press

(TALK)

or place the portable unit on the charger.

To redial after confirming the last number dialled 

Press

(REDIAL/PAUSE)

➡ 

(TALK)

.

To put a call on hold

Press 

(INTERCOM)

twice.

“       ” on the portable unit display flashes.

HOLD

” is displayed on the base unit and the SP-PHONE indicator

flashes.

During the hold, the caller will hear music.

To release the hold

From the portable unit, press 

(TALK)

.

From the base unit, press 

(SP-PHONE)

or lift the handset.

If noise interferes with the conversation

Press

(EXIT/CH)

to select a clearer channel or move closer to the base unit.

1112222

To select the receiver volume

Press

or while 

talking.

Each time you press

or 

, the

volume level will change.

The display will return to the length 
of the call.

Making Calls

HIGH

LOW

Loud
Low 

❚ ❚ ❚ ❚ ❚ ❚

High

GF

Loud
Low 

❚ ❚

High

GF

Содержание KX-TC1170ALN





















































































Отзывы: