Panasonic KX- TAW848 Скачать руководство пользователя страница 44

Страница: 44 / 137

2.2 Installation of the PBX

Installation Manual

2.2.8 Wall Mounting (KX-TAW848)

Mounting on Wooden Wall

Place the reference for wall mounting on the wall to mark the three screw positions.

Install the screws and washers (included) in the wall.

Notes

•

Make sure that the screw heads are at the same distance from the wall.

•

Install the screws perpendicular to the wall.

Hook the main unit on the screw heads.

Notes

•

Do not block the openings of the cabinet. Allow space of at least 20 cm (8 in) above
and 10 cm (4 in) at the sides of the cabinet.

•

Make sure that the wall behind the cabinet is flat and free of obstacles, so that the
openings on the back of the cabinet will not be blocked.

•

Be careful not to drop the cabinet.

250 mm

(9.8 in)

130 mm (5.1 in)

Washer

Drive the screw
to this position.

Содержание KX- TAW848










































































































































Результаты поиска

Содержание KX- TAW848

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KX- TAW848, Руководство по установке

Результаты поиска

Содержание KX- TAW848

Отзывы:

Бренды по названию

Популярные бренды