Panasonic KX-TA824 Скачать руководство пользователя | Manualshive

Страница: 14 / 88

background image

1.1 System Highlights

14

Installation Manual

1.1

System Highlights

1.1.1

System Highlights

Built-in Voice Message (BV) (Optional voice message card required)

Built-in Voice Message (BV) allows a caller to leave a voice message in a user's personal message
area or the PBX's common message area.

Caller ID Display on SLT

The PBX can receive Caller ID information (telephone numbers and callers' names) from calls
received on outside (CO) lines. This information can be shown on the displays of SLTs that support
Caller ID as well as proprietary telephones (PTs) when receiving calls.

3-level Automated Attendant (AA)

3-level Automated Attendant (AA) service allows a caller to dial a single-digit number (Direct Inward
System Access [DISA] AA number) following the guidance of 3-level DISA outgoing messages
(OGMs), and be connected to the desired party automatically.

PC Programming

System programming settings can be accessed using a PC and the Panasonic KX-TA Maintenance
Console software as well as by using a PT.

The PBX software can be upgraded via the Serial Interface (RS-232C port) or USB port, using the
KX-TA Maintenance Console software.

Quick Setup

Basic PBX parameters such as Automatic Configuration for Outside (CO) Line Type, Country Setting
can be programmed the first time the PBX is accessed with a PC using the KX-TA Maintenance
Console software.

Call Waiting Caller ID

Call Waiting Caller ID allows the user to see the name or telephone number of a second caller during
a conversation.

Local Carrier-based Voice Mail Service

Local carrier-based voice mail service allows the user to receive remote voice mail service from the
telephone company to record caller messages when calls cannot be answered.

Wireless Proprietary Telephones (PTs)

Wireless PTs such as the KX-T7885 and the KX-TD7895 give a user the freedom to move around
and still have the powerful features of Panasonic PTs. Some examples of the advantages of wireless
PTs over wireless SLTs are:

a)

Caller ID

b)

Seizure of outside (CO) lines by a one-touch operation

c)

Carrier-based voice mail service

Refer to the Operating Instructions of the wireless PT for additional information.

Advanced Hybrid System

This PBX supports the connection of PTs, wireless PTs, Direct Station Selection (DSS) Consoles,
and single line devices such as SLTs, fax machines, wireless SLTs, and data terminals.

«
...
12
13
14
15
16
...
»

Содержание KX-TA824

























































































Отзывы:

Нет отзывов

Похожие инструкции для KX-TA824

Бренд: GE Страницы: 2

Бренд: 3Com Страницы: 84

SuperStack 3 NBX

Бренд: 3Com Страницы: 496

Бренд: 3CX Страницы: 15

Бренд: ABRIVO Страницы: 24

Бренд: Uniden Страницы: 51

Бренд: Newcont Страницы: 14

Бренд: Swissvoice Страницы: 103

Бренд: Jumbo Страницы: 4

Бренд: Sagem Страницы: 2

Бренд: Vega Страницы: 60

Бренд: Uniden Страницы: 16

Бренд: Uniden Страницы: 28

Бренд: GAI-Tronics Страницы: 16

Forum phone 320

Бренд: BELGACOM Страницы: 37

Бренд: Bell System Practices Страницы: 7

Бренд: Aristel Страницы: 50

25255RE2 - ViSYS Cordless Phone Base Station

Бренд: RCA Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды