Panasonic KX-TA1232, Руководство по программированию

Страница: 113 / 216

General Programming
Programming Guide 113
[402] Dial Mode Selection
Description
Each outside line can be programmed for DTMF (Dual Tone Multi-Frequency), pulse (rotary)
or call blocking. This program assigns your choice to each line.
DTMF:
The dialing signals from an extension, either tone or pulse, are converted to tone signals and
transmitted to the outside line.
Pulse:
The dialing signals from an extension, either tone or pulse, are converted to pulse signals and
transmitted to the outside line.
Call blocking:
If your central office can receive both DTMF and pulse signals but you are contracted for pulse,
select this mode. When dialing on the line with a touch tone telephone, only the pulse signals
are sent to the outside line.
Selection
• Outside line (CO) number: 01 through 12, ( =all outside lines)
• DTMF / Pulse / C. Block (call blocking)
Default
All outside lines — DTMF
Programming
1.
Enter 402.
Display: 402 DIAL MODE
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:DTMF
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
pg.book 113 ページ ２００１年７月３日 火曜日 午後２時４４分