background image

Important Safety Instructions

When using this unit, basic safety precautions, including those below, should always be followed to
reduce the risk of fire, electric shock and injury to persons.

1.

Read and understand all instructions.

2.

Follow all warnings and instructions marked on this unit.

3.

Unplug this unit from the main unit before cleaning. Do not use liquid or aerosol cleaners. Clean
with a soft cloth.

4.

Do not use the unit near water, for example, near a bathtub, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool.

5.

Place this unit on a flat surface. Serious damage and/or injury may result if the unit falls.

6.

The unit should never be placed near or over a radiator or other heat source.

7.

Do not allow anything to rest on the extension cord. Do not locate this unit where the cord may
be stepped on or tripped on.

8.

To reduce the risk of fire or electric shock, do not overload wall outlets and extension cords.

9.

Do not insert objects of any kind into this unit through openings, as they may touch dangerous
voltage points or short out parts that could result in a risk of fire or electric shock. Never spill
liquid of any kind on the unit.

10.

To reduce the risk of electric shock, do not disassemble this unit. Only qualified personnel should
service this unit. Opening or removing covers may expose you to dangerous voltages or other
risks. Incorrect reassembly can cause electric shock.

11.

Unplug this unit from the main unit and have the unit serviced by qualified service personnel in
the following cases:

A.

When the power supply cord or plug is damaged or frayed.

B.

If liquid has been spilled on the unit.

C.

If the unit has been exposed to rain or water.

D.

If the unit does not operate according to this manual. Adjust only the controls that are
explained in this manual. Improper adjustment of other controls may result in damage and
may require service by a qualified technician to restore the product to normal operation.

E.

If the unit has been dropped, or damaged.

F.

If the unit’s performance deteriorates.

12.

Avoid using a wired telephone during an electrical storm. There is a remote risk of electric shock
from lightning.

13.

Do not use a telephone in the vicinity of a gas leak to report the leak.

SAVE THESE INSTRUCTIONS

13

Important Information

Содержание KX-T7716C

















Отзывы: