Panasonic KX-T336, Руководство по установке

Страница: 92 / 872

2.00 Call Forwarding (FWD)
2.01 Call Forwarding-All Calls
Description
Call Forwarding-All Calls allows extension users
who are away from their phones to receive
incoming calls (both extension and CO) to them
at another extension.
Incoming calls can be forwarded either to
extension users, Voice Mail port, or operators
(Attendant Console or Extension).
“FDN for General Operator Call” can be used to
assign operators as the destination of Call
Forwarding.
Refer to Section 9-D-l
“Operation for
further information.
The following incoming calls do not receive Call
Forwarding treatment.
l
A call from doorphone
A call routed via DIL 1: N feature
l
A call directed to a UCD group
To execute Call Forwarding-All Calls, assign
“System-Class of Service”,
Not to
To set and cancel this function, dial the feature
number for “Call Forwarding-Ail Calls and
“Call Forwarding-Do Not Disturb Cancel.”
Programming
System Programming
Reference
VT
D u m b
‘System-Class of Service 9-D-4.01 10-C-7.00
Call
Forwarding/Do Not
Disturb
“System-Numbering Plan Q-D-6.04
1
Call Forwarding-All Call Set
“System-Numbering Plan 9-D-6.05 1 O-c-l 0.00
1
Call Forwarding/Do Not
Disturb Cancel
Conditions
An extension user may have only one type of
Call Forwarding/Do Not Disturb feature in effect
at any time. If a second type is assigned, the
previously assigned type is canceled.
If the extension to which calls are to be
forwarded itself is in a call forward mode, a call is
not forwarded furthermore. The call rings at the
first forwarded extension. In case of an outside
call, if not answered in a specified time period,
the call will be routed to another destination, if
available, based on the “Intercept Routing-No
Answer” feature.
If Tenant Service is employed and “Inter Tenant
Calling” is assigned to “Yes” by programming,
this function is ineffective for the calls from
another tenant if the destination of Call
Forwarding-All Calls is set to an Attendant
Console.
Calls from any VM extension will not be
forwarded, if forwarding destination is another
VM extension.
The following attempt will be rejected with
reorder tone.
l
If Tenant Service is employed, the user cannot
set the destination to an extension in the other
tenant.
l
To call the other extension whose call
forwarding destination is set to his or her own
extension.
The Operators (Attendant Console or Extension)
can cancel the Call Forwarding/Do Not Disturb
feature assigned to the extension users. Refer to
Section 5-G-9.00 ‘Remote Station Feature
Control.”
5-D-4
(70695)
Technical Manuals Online! - http://www.tech-man.com