Panasonic KX-T0155 Скачать руководство пользователя страница 42

Страница: 42 / 48

8 Wall Mounting

Mounting the KX-T0155/KX-T0158/KX-TDA0156

WARNING

•

Make sure that the wall that the unit will be attached to is strong enough to support the unit
(approx. 310 g [11 oz]). If not, it is necessary for the wall to be reinforced.

•

Only use the wall-mounting equipment (screws, washers, wall mounting plate) included with
the unit.

•

When this product is no longer in use, make sure to detach it from the wall.

CAUTION

•

When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.

•

Do not stretch or bend the cables. Also, do not allow anything to rest on the cables.

•

Use cables that are fire-resistant or fireproof.

•

The CS and the cables should never be placed near or over a radiator or other heat source.

•

Do not bundle cables that are connected to the CS with the AC power cords of machines located
nearby.

•

Make sure the cables are securely fastened to the wall.

Place the reference for wall mounting on the wall to mark the 2 screw positions.

Install the 2 screws and washers (included) into the wall.

Note

•

Make sure that the screw heads are at the same distance from the wall.

•

Install the screws perpendicular to the wall.

Insert the upper and lower tabs of the wall mounting plate into the designated openings in the base unit.

KX-T0155/KX-TDA0156

Tabs

Wall Mounting Plate
(PSKL1032Y4)

KX-T0158

Tabs

Wall Mounting Plate
(PSKL1032Y4)

Quick Installation Guide

Document Version 2009-12

8 Wall Mounting

Содержание KX-T0155

















































Результаты поиска

Содержание KX-T0155

Отзывы:

Похожие инструкции для KX-T0155

Бренды по названию

Популярные бренды

Panasonic KX-T0155, Быстрое руководство по установке

Результаты поиска

Содержание KX-T0155

Отзывы:

Похожие инструкции для KX-T0155

Бренды по названию

Популярные бренды