74
If you wish to adjust the density for each color independently,
perform the following, then go to step 5.
#
Repeat instructions
#
through
%
of step 1 on
page 70
.
$
Press the
F
button.
%
Press the ENTER button.
&
Press the
F
/
I
button to darken/lighten the cyan color.
Pressing the
F
/
I
button twice selects the next/previous level setting.
(For example:)
B
If you wish to make the density setting darker by 4 levels:
Press the
F
button 8 times.
B
If you wish to make the density setting lighter by 2 levels:
Press the
I
button 4 times.
'
Press the ENTER button.
(
Repeat instructions
%
through
'
for each color
(MAGENTA, YELLOW, BLACK).
B
To skip a color, press the
F
button.
B
To return to a previous color, press the
I
button.
B
Before going to step 5, make sure the following is displayed.
Press the ENTER button to reprint the Color Calibration Page.
B
The line enclosure reflects the changes made to the settings.
B
If you are not satisfied with the current color density settings, repeat steps 4
and 5 above.
Notes:
B
The color density setting affects the average life of toner.
B
Save the Color Calibration Card for future calibrations.
Color Calibration
CYAN
Color Calibration
Calibration Test Print
CYAN
0* (-10 to 10)
Color Calibration
MAGENTA
5
Setup
4
B
