Panasonic KX-PRW130C Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 60

Panasonic KX-PRW130C Скачать руководство пользователя страница 7

R

If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.

Environment

R

Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.

R

The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.

R

The product should not be exposed to
direct sunlight.

R

Do not place heavy objects on top of the
product.

R

When you leave the product unused for a
long period of time, unplug the product from
the power outlet.

R

The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.

R

The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.

R

Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.

Routine care

R

Wipe the outer surface of the product
with a soft moist cloth.

R

Do not use benzine, thinner, or any
abrasive powder.

Other information

CAUTION:

Risk of explosion if battery is

replaced by an incorrect type. Dispose of used
batteries according to the instructions.

Notice for product disposal, transfer,
or return

R

This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.

Specifications

R

Communication standards

DECT 6.0 (Digital Enhanced Cordless
Telecommunications 6.0)
Wi-Fi (IEEE 802.11 b/g/n)

R

Frequency range
DECT:

1.92 GHz to 1.93 GHz

Wi-Fi:

2.412 GHz to 2.462 GHz (channels 1 to 11)

R

RF transmission power
DECT:

115 mW (max.)

Wi-Fi:

100 mW (peak transmission power)

R

Encryption

WPA2-PSK (TKIP/AES), WPA-PSK (TKIP/
AES), WEP (128/64 bit)

R

Simplified configuration

WPS (PBC)

R

Power source

120 V AC, 60 Hz

R

Power consumption
Base unit:

Standby: Approx. 1.5 W
Maximum: Approx. 3.9 W

R

Operating conditions

0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)

7

Important Information

PRW130C(en)_0311_ver110.pdf 7

2014/03/11 13:06:41

«
...
5
6
7
8
9
...
»

Содержание KX-PRW130C





























































Отзывы:

Нет отзывов