6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
M
Menu
N
(right soft key)
#256
2
Enter the base unit PIN (default:
“
0000
”
).
R
If you forget your PIN, contact an
authorised service centre.
3
Select the handsets to be restricted by
pressing
1
to
6
.
R
All handsets registered to the base unit
are displayed.
R
“ ” is displayed next to the selected
handset numbers.
R
To cancel a selected handset, press
the same dial key again. “ ”
disappears.
4
M
OK
N
5
Select a memory location by pressing
1
to
6
.
a
M
OK
N
6
Enter the phone number or area code to
be restricted (8 digits max.).
a
M
OK
N
a
M
N
Note:
R
You can also select your smartphone in this
feature using a handset, if your smartphone
is registered to the base unit (page 44).
Changing the base unit PIN
Important:
R
If you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, contact
an authorised service centre.
1
M
Menu
N
(right soft key)
#132
2
Enter the current 4-digit base unit PIN
(default:
“
0000
”
).
3
Enter the new 4-digit base unit PIN.
a
M
OK
N
4
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
Changing the unit’s region
setting/Resetting the base unit
1
M
Menu
N
(right soft key)
#136
2
MbN
: Select the desired country.
a
M
OK
N
“
Australia
”
= Australia
“
NewZealand
”
= New Zealand
3
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
Note:
R
Changing the unit’s region setting may
cause the settings for your country or your
customised settings to return to their default
settings.
Calendar/Schedule
You can program 20 schedule alarms for each
handset using the calendar. A schedule alarm
sounds at the set time for 1 minute. A text
memo can also be displayed for the schedule
alarm.
Important:
R
Make sure the unit’s date and time setting
is correct (page 13).
Adding a new entry
1
M
Menu
N
(right soft key)
a
a
M
OK
N
2
MbN
: Select the desired date.
a
M
OK
N
3
M
Menu
N
a
MbN
:
“
New Entry
”
a
M
OK
N
4
Edit the date if necessary.
a
M
OK
N
5
Set the desired time.
a
M
OK
N
6
Enter a text memo (30 characters max.;
page 47).
a
M
OK
N
7
MbN
: Select the desired alarm tone.
a
M
OK
N
2 times
R
You can select
“
Off
”
if you prefer not
to hear an alarm tone.
R
We recommend selecting a different
ringer tone from the one used for
outside calls.
8
M
N
Note:
R
To stop the alarm, press
M
Stop
N
or place
the handset on the base unit or charger.
32
Programming
PRW120AZ(en)_0724_ver012.pdf 32
2013/07/24 14:17:29
