Problem
Cause/solution
I cannot send or receive
SMS messages.
R
You have not subscribed to the appropriate service. Contact
your service provider/telephone company.
R
The SMS message centre number(s) are not stored or are
incorrect. Store the correct numbers (page 35).
R
Message transmission was interrupted. Wait until the message
has been sent before using other telephone functions.
R
If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
“
FD
”
is displayed.
R
The unit could not connect to the SMS message centre.
Confirm that the correct SMS message centre numbers are
stored. Confirm that SMS is turned on (page 35).
“
FE
”
is displayed.
R
An error occurred while sending the message. Try again.
“
E0
”
is displayed.
R
Your phone number is permanently withheld or you have not
subscribed to the appropriate service. Contact your service
provider/telephone company.
Liquid damage
Problem
Cause/solution
Liquid or other form of
moisture has entered the
handset/base unit.
R
Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.
Caution:
R
To avoid permanent damage, do not use a microwave oven to speed up the drying process.
44
Useful Information
PRS110FX(en)_0725_ver020.pdf 44
2013/07/25 9:56:14
