3
Enter the desired hour and minute you
wish to start this feature.
a
M
OK
N
4
Enter the desired hour and minute you
wish to end this feature.
a
M
OK
N
a
M
N
Changing the start and end time
1
M
Menu
N
(right soft key)
#237
2
Continue from step 3, “Turning night
mode on/off”, page 26.
Setting the ring delay
This setting allows the handset to ring during
night mode if the caller waits long enough.
After the selected amount of time passes, the
handset rings. If you select
“
No Ringing
”
,
the handset never rings during night mode.
1
M
Menu
N
(right soft key)
#239
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
Selecting categories to bypass night
mode
1
M
Menu
N
(right soft key)
#241
2
Select your desired categories by
pressing
1
to
9
.
R
“ ” is displayed next to the selected
category numbers.
R
To cancel a selected category, press
the same dial key again. “ ”
disappears.
3
M
OK
N
a
M
N
Incoming call barring
This feature allows the unit to reject calls from
specified phone numbers that you do not want
to answer such as junk calls.
When a call is received, the unit does not ring
while the caller is being identified. If the phone
number matches an entry in the call barred
list, the unit emits no sound to the caller, and
disconnects the call. (Caller ID subscribers
only)
Important:
R
When the unit receives a call from a
number that is stored in the call barred list,
the call is logged in the caller list
(page 33) with
after the call is
disconnected.
Storing unwanted callers
You can store up to 100 phone numbers in the
call barred list.
Important:
R
You must store the phone number with an
area code in the call barred list.
n
From the caller list:
1
M N
2
MbN
: Select the entry to be barred.
a
M
Detail
N
a
M
Menu
N
3
MbN
:
“
Save CID
”
a
M
OK
N
4
MbN
:
“
Caller Barred
”
a
M
OK
N
5
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
n
By entering phone numbers:
1
M
Menu
N
(right soft key)
#217
a
M
Add
N
2
Enter the phone number (24 digits
max.).
a
M
OK
N
3
M
N
Viewing/editing/erasing bar call
numbers
1
M
Menu
N
(right soft key)
#217
2
MbN
: Select the desired entry.
R
To exit, press
M
N
.
3
To edit a number:
M
Edit
N
a
Edit the phone number.
a
M
OK
N
a
M
N
To erase a number:
M
Erase
N
a
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
27
Programming
PRS110FX(en)_0725_ver020.pdf 27
2013/07/25 9:56:12
