background image

Windo

ws

1

LPR port printing with TCP/IP is only explained in this 
guide. For other settings and detailed information, see 
“Network” section in the Operating Instructions. (See 
below.) 

Reading the Operating Instructions

The Operating Instructions are installed in your 
computer after installing the printer driver. Before 
installing the printer driver, you can also read the 
Operating Instructions on the printer CD-ROM as 
follows:

(1) Insert the printer CD-ROM into your computer CD-

ROM drive.

(2) Double click the Network.pdf in the Manual folder 

on the printer CD-ROM.

• To open and read the Operating Instructions on your 

screen, Acrobat Reader program must be installed in 
the computer. To install it, double click the 

Ar405eng.exe*

2

.

*1

Microsoft® Windows® operating system (hereafter 

Windows)

*

2

File name of Acrobat Reader may differ depending on the 

version.

• Microsoft, Windows and Windows NT are either registered 

trademarks or trademarks of Microsoft Corporation in the 
United States and/or other countries.

• AppleTalk, LaserWriter, Mac and Macintosh are 

trademarks of Apple Computer, Inc.

• Adobe, the Adobe logo, Acrobat, and the Acrobat logo are 

trademarks of Adobe Systems Incorporated.

• All other acknowledgments are trademarks or registered 

trademarks of their respective holders.

Acrobat® Reader copyright © 1987-1999 Adobe Systems 
Incorporated. All rights reserved.

The instructions are subject to change without notice.
© Kyushu Matsushita Electric Co., Ltd. 2001

Step 1: Setting up TCP/IP on the 
Computer

If the TCP/IP of your computer is already set, proceed 
to the next step. If it is not set, consult with your 
network administrator. Regarding the configuration of 
TCP/IP, refer to the help menu or documentation for 
Windows.

Step 2: Setting up TCP/IP of the Printer

You may need to contact your network administrator to 
set up the TCP/IP.

1

Press PRINT/RESET button on the printer 
panel less than 5 seconds to print the 
configuration page.

2

Confirm the MAC address on the configuration 
page.

3

Insert the printer CD-ROM into the CD-ROM 
drive.
The CD-ROM launches automatically.

Note:
• If the CD-ROM does not launch automatically, 

perform the following procedures

.

(1)Double click My computer icon.
(2)Double click the CD-ROM icon.

*1

Microsoft® Windows® 95 operating system

(hereafter Windows 95)

*

2

Microsoft® Windows® 98 operating system

(hereafter Windows 98)

*

3

Microsoft® Windows® Millennium Edition operating 

system (hereafter Windows Me)

Laser Printer
Network Setup Guide

Model No.

  

KX-P7110

KX-P7110 comes standard with an Ethernet network 
device. First read the Setup Guide for basic setup 
procedures and necessary precautions for safety and 
use. Then perform the network setup following this 
guide when the printer is connected to the network. 

For the detailed information, see the “Network” section 
in the Operating Instructions. 
Keep this documentation in a safe place for future 
reference. 

Table of Contents

Setup for Network Print

(For Windows). . . . . . . . . . . . . . . . . . . . 1

LPR Port Printing in Windows 95 /

Windows 98 / Windows Me   . . . . . . . . . . . . . . 1

LPR Port Printing in 

Windows NT 4.0 / Windows 2000   . . . . . . . . . 3

Installing the Web Administrative Tool   . . . . . . . 4

Setup for Network Print (For Mac). . . . . 4

Setup for Network Print
(For Windows®*

1

)

LPR Port Printing in Windows 95*

1

 

/Windows 98*

2

 / Windows Me*

3

Отзывы: