Panasonic KX-NS700, Руководство пользователя

Страница: 345 / 394

Button Steps
Log-in/Log-out of a
specified group
Select Log-in/Log-out from Type .
Then select Incoming Group from Parameter Selection .
And, enter the Incoming call distribution group extension number in
Extension Number .
Log-in/Log-out for all
groups Select Log-in/Log-out from Type .
Then select All from Parameter Selection .
Hurry-up
Select Hurry-up from Type .
Then enter the incoming call distribution group extension number in
Extension Number .
Wrap-up Select Wrap-up from Type .
System Alarm Select System Alarm from Type .
Time Service (Day/Night/
Lunch/Break)
Select Time Service from Type .
Then in Parameter Selection , select which time modes will be switched
manually.
In
Optional Parameter (Ringing Tone Type Number) , select the Time
Table (tenant number) to be used for changing time modes in Automatic
Switching mode.
Answer Select Answer from Type .
Release Select Release from Type .
Toll Restriction/Call Barring
Select TRS Level Change from Type .
Then select the Toll Restriction/Call Barring Level (1–7) from Parameter
Selection .
ISDN Service
Select ISDN Service from Type .
Then enter the desired number in Dial (max. 32 digits consisting of 0–9, ,
#, T [Transfer], [ ] [Secret], P [Pause], and F [Flash]).
Note
Availability of this button depends on the ISDN service of your telephone
company.
Refer to "1.2.5 Accessing the ISDN Service (ISDN Service Access)".
Calling Line Identification
Restriction (CLIR)
Select CLIR from Type .
Connected Line
Identification Restriction
(COLR)
Select COLR from Type .
ISDN-Hold Select ISDN Hold from Type .
Headset Select Headset from Type .
Time Service Switching
Mode (Automatic/Manual)
Select Time Service - Automatic/Manual from Type .
Then in Parameter Selection , select the Time Table (tenant number) to be
used when Time Service Switching Mode is set to Automatic.
User Manual 345
3.2.1 User Programming