Panasonic KX-NS300, Руководство по функциям

Страница: 147 / 580

Carrier Access Code
10
: Assign the code to access the carrier.
®
16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier— Carrier Access Code
Trunk Group
11
: Assign the trunk groups which connect to each carrier and the priority in which they are
selected.
When using Web Maintenance Console, trunk groups can be assigned to a carrier using an on/off setting
for each trunk group. They can also be given a priority setting (1–4) which decides the order they are
searched when seizing a line. If there are no available lines in the trunk groups set to priority 1–4, the other
trunk groups set to on are searched in the order of smallest number first.
[Example]
Carrier
Priority Setting
Trunk Groups
Set to On
Searching Order
1 2 3 4
ABC 9 3 1 7 5, 7, 9, 11
9
®
3
®
1
®
7
®
5
®
11
XYZ 12 4 None None 6, 10 12
®
4
®
6
®
10
®
16.5 PBX Configuration—[8-5] ARS—Carrier—TRG Priority
®
16.5 PBX Configuration—[8-5] ARS—Carrier—TRG 01–TRG 64
Modify Command
12
: Assign the commands to modify the dialled number to access the carrier.
®
16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier— Modify Command
CLIP Table No.
16
: Assign the CLIP number for the carrier. CLIP numbers are assigned according to the
CLIP Table No. assigned for the carrier.
®
16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier— CLIP Table No.
[Command Explanation]
Command Description
Number Add the number.
C Add the Carrier Access code.
P Analogue Line: Insert a pause.
ISDN/E1 Line: Insert a pause and change to tone (DTMF) signal.
A Add the Authorisation code for a tenant (
13
).
G Add the Authorisation code for a trunk group (
14
).
I Add the Itemised Billing code (
15
).
H Add the dialled number after the digits are removed (Home position).
Feature Guide 147
2.8.1 Automatic Route Selection (ARS)