Panasonic KX-NS1000, Начало работы

Страница: 29 / 58

3.
In PBX Setting :
a.
Specify a Site name if Master was selected for PBX
Type in step 2 .
b.
Select a Time Zone from the drop-down list.
c.
Click the Local Time box and select the date and
time from the menu.
d.
Click Next .
4.
In LAN Setting , the IP addresses for the PBX, DNS server, and DSP cards can be assigned automatically
through a DHCP server or entered manually.
When using a DHCP server:
a.
Select Obtain an IP address automatically .
b.
Select Obtain DNS server address automatically .
c.
Select Obtain DSP IP address automatically .
Notice
The boxes will turn grey and the IP address
information will be assigned automatically.
Write down the address information assigned to
the PBX for future reference.
d.
Click Next .
When not using a DHCP server:
a.
Select Use the following IP address .
b.
Enter an IP address
*1
, Subnet Mask
*2
, and Default
Gateway
*1
. (The default gateway may not need to be
specified depending on your network configuration.)
c.
Select Use the following DNS server address .
d.
Enter the preferred and alternative DNS IP
addresses
*1
.
e.
Select Use the following DSP IP address .
f.
Enter up to 2 IP addresses
*1
for each installed DSP
card.
g.
Click Next .
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except "0.0.0.0" and "255.255.255.255")
Getting Started 29
4.1.1 Easy Setup Wizard