Panasonic KX-NS1000, Руководство пользователя

Страница: 241 / 542

Item Description
Printing Message Specifies the messages that can be selected from an extension
(
®
2.22.2 Printing Message).
®
14.2 PBX Configuration—[6-2] Feature—Hotel &
Charge—Main— SMDR for External Hotel Application
2—Printing Message 1–8
Time format Controls whether time is displayed in 12-hour or 24-hour format.
®
19.1 PBX Configuration—[11-1]
Maintenance—Main—SMDR— SMDR Format—Time Format
(12H / 24H)
Conditions
[General]
•
SMDR Format
The following SMDR format can be set through system programming in order to match the paper size being
used in the printer:
a.
Page Length: determines the number of lines per page.
®
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR— SMDR Format—Page Length
(Number of Lines)
b.
Skip Perforation: determines the number of lines to be skipped at the end of every page.
®
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR— SMDR Format—Blank Footer
Length (Number of Lines)
The page length should be at least four lines longer than the skip perforation length.
Explanation:
Skip
Perforation
Page
Length
Machine
Perforation
•
SMDR data is not deleted even if the PBX is reset.
•
If the PBX is reset during a conversation, the call will not be recorded on SMDR.
•
When a call is made from an extension to a number in the Emergency Dial Table (
®
2.5.4.2 Emergency
Call), the PBX can be programmed to record the call information on SMDR both immediately after the
number is dialled and after the call ends. (Normally, the PBX records the call information only after the call
ends.)
®
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR Options— Emergency Call Notification
•
The following calls are regarded as two separate calls for SMDR:
–
Calls before and after the flash/recall/EFA signal is manually sent during a conversation
–
Trunk-to-trunk calls by Call Transfer, FWD or DISA (recording each as "incoming call" and "outgoing
call")
Feature Guide 241
2.22.1 Record Log Features