Panasonic KX-NS1000, Руководство по программированию ПК

Страница: 57 / 1294

A •
The following setting data is not saved to the Storage Memory Card, so will be deleted
when the PBX is initialized. This data is stored in the PBX’s battery backup memory.
•
Advice of Charge (AOC)
•
Hospitality guest billing data
•
Timed Reminder
•
ICD Group login status
(All extensions are set to Login by default.)
•
Remote Extension Dial Lock
Setting Features
Q How do I change the dialing mode of an analog CO line?
A •
From the 9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property -
LCO Port screen, change the Dialing Mode setting of the target port to "DTMF" or
"Pulse", as required.
Q How do I set disconnect detection (CPC Detection) for an analog CO line?
A
•
From the 9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property -
LCO Port screen, modify the CPC Signal Detection Time—Outgoing,
Incoming setting of the target port.
The required value varies by carrier. Transmission and reception can be set
separately.
Q How do I connect to another PBX using QSIG?
A •
From the 9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property -
PRI Port screen, set the Port Type of the port you want to use to either
"QSIG-Slave" or "QSIG-Master".
Q What programming do I have to perform to use a headset with an IP-PT?
A •
Set Headset OFF/ON on the 9.15 PBX Configuration—[1-1]
Configuration—Slot—V-IPEXT32—Port Property screen to "Headset ON".
Q How do I edit a Class of Service, or create a new Class of Service?
A •
Class of Service feature restrictions can be set from the 10.7.1 PBX
Configuration—[2-7-1] System—Class of Service—COS Settings screen.
Q How do I restrict calls between 2 extensions?
A •
Calls between extensions can be restricted from the 10.7.3 PBX
Configuration—[2-7-3] System—Class of Service—Internal Call Block screen.
Click in the relevant cells to select the COS levels whose extensions are blocked from
calling each other.
Q How do I restrict CO line calls made by extensions?
Document Version 2016-03 PC Programming Manual 57
2.3 Frequently Asked Questions (FAQ)