Panasonic KX-NCP1000, Руководство по программированию

Страница: 61 / 1016

Data Type Import Destination
Packet Sampling Time (G.729A) Packet Sampling Time (G.729A)
Voice Activity Detection for G.711 Voice Activity Detection for G.711
FAX Detection Ability FAX Detection Ability
DTMF DTMF
Payload Type Payload Type
Related programming: 3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
V-IPGW16 DN2IP
Data Type Import Destination
No. Location
Leading Number Leading Number
Remaining Number of Digits Remaining Number of Digits
GW No./GW Group Selection GW No./GW Group Selection
GW Group GW Group
GW No. GW No.
Related programming: 3.12 [1-1] Slot—Shelf Property - Virtual IP Gateway—DN2IP
To import system data
1.
From the Tool menu, point to Import , and then click the type of data to import.
2.
Navigate to the folder containing the system data file you want to open.
3.
Select the file.
4.
Click Open to open the file.
If applicable, a list of field names found in the imported file will be displayed.
5.
For the Feature - Speed Dial and Caller ID table, select the Speed Dial table to which to import the data
(system or tenant) from the drop-down list.
6.
If required, select import fields.
When import fields can be selected, the selection screen is displayed automatically. Matching origin and
destination fields are entered by default.
•
To change the destination for an import field, select the preferred field from the drop-down list.
•
To not import a field, select the blank option from the drop-down list.
7.
Click OK to perform the import operation.
Depending on the type of data imported, the relevant programming screen may be displayed.
•
Click OK or Apply to complete the import operation.
If data in a field being imported does not match the required format for the import destination, an error
message will be displayed when the import operation is attempted, and the operation will be cancelled.
This can occur when, for example, the destination field can only accept numeric data, but the data being
imported contains alphabet characters, as the correct fields were not linked together.
PC Programming Manual 61
2.5.9 Tool—Import