9. Programmable Features
59
Setting the recording paper
type
{#}{
3
}{
8
}{
3
}
{
1
}
“
PLAIN PAPER
”
(default): 75 g/m
2
to 105 g/m
2
(20 lb to 28 lb) paper.
{
2
}
“
THIN PAPER
”
: 60 g/m
2
to 74 g/m
2
(16 lb to 19 lb) paper.
{
3
}
“
THICK PAPER
”
: 106 g/m
2
to 165 g/m
2
(29 lb to 44 lb) paper.
Note:
L
This setting is valid for both the standard input tray and the optional input
tray.
L
“
THICK PAPER
”
will be displayed only when
“
#1
”
is selected for the
following:
–
Paper input tray setting for fax (Feature #440 on page 63).
–
Paper input tray setting for copy (Feature #460 on page 64).
–
Paper input tray in PCL
®
(Feature #760 on page 65).
–
Paper input tray setting for the scan to e-mail print feature (Feature #565
on page 71).
Setting the waiting time for
the power save mode
{#}{
4
}{
0
}{
3
}
To set the length of time before the unit enters the power save mode.
{
1
}
“
5min
”
: 5 minutes
{
2
}
“
15min
”
(default): 15 minutes
{
3
}
“
30min
”
: 30 minutes
{
4
}
“
1h
”
: 1 hour
Note:
L
During the power save mode, the unit needs to preheat the fuser unit before
printing.
Holding the previous contrast
setting
{#}{
4
}{
6
}{
2
}
{
0
}
“
DISABLED
”
(default): Deactivates this feature.
{
1
}
“
ENABLED
”
: The unit will hold the previous setting.
Note:
L
The previous setting will be held individually for copying and sending faxes.
Setting the default operation
mode
{#}{
4
}{
6
}{
3
}
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{
1
}
“
COPY
”
(default): Copy mode is selected as default.
{
2
}
“
FAX
”
: Fax mode is selected as default.
Note:
L
You cannot select the scan mode using this feature.
Setting the default operation
mode timer
{#}{
4
}{
6
}{
4
}
To set the timer before returning to the default operation mode (feature #463).
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
30s
”
: 30 seconds
{
2
}
“
1min
”
(default): 1 minute
{
3
}
“
2min
”
: 2 minutes
{
4
}
“
5min
”
: 5 minutes
Cleaning the drum
{#}{
4
}{
8
}{
0
}
Clean the drum cartridge automatically. See page 103 for details.
Setting toner save feature
{#}{
4
}{
8
}{
2
}
{
0
}
“
OFF
”
(default): Deactivates this feature.
{
1
}
“
ON
”
: The toner cartridge will last longer.
Note:
L
This feature may lower the print quality by reducing toner consumption.
Changing the color
calibration for all colors
(cyan, magenta, yellow and
black)
{#}{
4
}{
8
}{
5
}
Change the color calibration if color printing is too dark or too light. See page 76
for details.
Changing the color
calibration for cyan color
{#}{
4
}{
8
}{
6
}
Change the color calibration if color printing is too dark or too light. See page 76
for details.
Feature/Code
Selection
