Panasonic KX-MB3150CX Скачать руководство пользователя страница 88

Страница: 88 / 128

11. Help

11.2 Display messages

To indicate the unit’s status, one or more of the following messages will appear on the display.

Display

Cause & Solution

“

Call Service

”

There is something wrong with the unit. Contact our service personnel.

“

Change Drum

”

There is something wrong with the drum cartridge. Replace the drum
cartridge.

“

Change Supplies Toner

Empty

”

The toner is empty. Replace the toner cartridge immediately.

“

Change Supplies Toner

Low

”

The toner is reaching the end of its life. You will need to replace the toner
cartridge soon.

“

Check Document

”

The document was not fed into the unit properly. Remove the document,
and then press

{

Stop

}

to clear the message. Re-insert the document. If

misfeeding occurs frequently, clean the document feeder rollers (page 108)
and try again.

“

Check Drum

”

The drum cartridge is not inserted properly. Re-insert it correctly (page 13).

“

Check Install Input

Tray #1

”

The paper input tray is not installed correctly. Pull out the paper input tray
and re-insert it.

Note:

“

”

: Standard input tray

“

”

: Lower input tray

“

#1+#2

”

: Standard input tray and lower input tray

“

Check Paper

”

The recording paper size setting and/or the loaded recording paper is not
appropriate.
–

The recording paper size is not the same as the size selected for copy.

–

The recording paper size is not the same as the size selected when
printing from the PC.

–

The recording paper size is not the same as the size selected for
receiving a fax.

Change the recording paper size setting (feature #380 on page 65 or
feature #382 on page 65), and load the appropriate recording paper.

“

Check Pick Up Input

Tray #1

”

Recording paper was not fed into the unit properly. Load the paper again
(page 105).

Note:

“

”

: Standard input tray

“

”

: Lower input tray

“

Directory Full

”

There is no space to store new items in the navigator directory. Erase
unnecessary items (page 46).

“

Drum Life Low

”

The drum is reaching the end of its life. Replace the drum cartridge as soon
as possible.

“

Email Size Over

”

When performing scan to email address, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.

Содержание KX-MB3150CX

































































































































Результаты поиска

Содержание KX-MB3150CX

Отзывы:

Бренды по названию

Популярные бренды

Panasonic KX-MB3150CX, Руководство по эксплуатации

Результаты поиска

Содержание KX-MB3150CX

Отзывы:

Бренды по названию

Популярные бренды