Panasonic KX-MB2060C, Руководство по эксплуатации

Страница: 49 / 156

6.1 Making phone calls
6.1.1 With the base unit
M
Redial
N M
Monitor
N M
Intercom
N
1
Lift the handset.
2
Dial the telephone number.
3
To hang up, replace the handset.
To redial the last number dialed from the base unit
M Monitor N A M Redial N
To put a call on hold
1.
Press M Intercom N 2 times during an outside call and
then replace the handset.
2. To release hold, press M Monitor N or lift the handset.
R You can also take the call at the cordless handset
by pressing
M N or M N (KX-MB2060 optional).
Note:
R If a call is kept on hold for more than 9 minutes, an
alarm tone starts to sound. After 1 additional minute
on hold, the call is disconnected.
R If another telephone is connected to the same line,
you can also take the call by lifting its handset.
6.1.2 With the cordless handset (KX-MB2060
optional)
MCNMDNME REDIAL N M OFF N
A
M s N
M C N
1
Lift the cordless handset and dial the telephone
number.
R To correct a digit, press M CLEAR N (soft key A ).
2
M N or M CALL N (soft key A )
R To make hands-free telephone calls, press M N .
3
To hang up, press M OFF N or place the cordless
handset on the charger.
Note:
R While talking using M N , you can switch to a
hands-free telephone conversation by pressing M N .
To switch back, press M N .
R For best performance, use the speakerphone in a
quiet environment.
To mute your conversation
While mute is turned ON, you can hear the other party,
but the other party cannot hear you.
1. Press M MUTE N (soft key A ) during conversation.
R M MUTE N (soft key A ) flashes.
2. To return to the conversation, press M MUTE N (soft
key A ) again.
Note:
R M MUTE N (soft key A ) is a soft key visible on the
cordless handset display during a call.
Handset equalizer
This feature clarifies the voice of the person you are
talking to, producing a more natural-sounding voice that
is easier to hear and understand.
1. Press M MENU N (soft key A ) while talking.
2. “
Equalizer
” A M SELECT N (soft key A )
3. Press MCN or MDN repeatedly to select the desired
setting.
4. Press M OK N (soft key A ) to exit.
Note:
R When this feature is activated, is displayed while
talking.
R Depending on the condition and quality of your
telephone line, this feature may emphasize existing
line noise. If it becomes difficult to hear, turn this
feature off.
R This feature is not available while using the
speakerphone.
To put a call on hold
1.
Press M MENU N (soft key A ) during an outside call.
2. “
Hold
” A M SELECT N (soft key A )
3. To release hold, press M N .
R Another cordless handset user can take the call
by pressing
M N .
R You can also take the call at the base unit by
pressing
M Monitor N or lifting the handset.
49
6. . Telephone
6. Telephone