Panasonic KX-HTS824, Руководство по функциям

Страница: 34 / 80

When setting is complete, a confirmation tone is heard.
Conditions
Conditions Note
A call can only be automatically forwarded one time. (Except FWD
NA)
Example:
If Extension A's FWD settings are as follows, when Extension A
receives a call, only Extension B will receive the call (it will not be
forwarded to Extension C):
•
Extension A's FWD settings are FWD ALL, and the forwarding
destination is set to Extension B.
•
Extension B's FWD settings are FWD ALL or FWD Busy, and the
forwarding destination is set to Extension C.
For extension groups, FWD settings can only be programmed in the
Web Maintenance Console. Programming Item List
2.3.4 PBX Configuration—[2-4]
Extension—Extension Group—
Group Setting
FWD destination can be selected in Web Maintenance Console
(Include User level account).
When an extension user dials the feature number and changes the
FWD destination number, the FWD destination number set as
Other
is changed.
Programming Item List
2.2.1 PBX Configuration-
[2-2]Extension-Phone-FWD/DND-
Destination Number
Phone(Home)
Phone(Mobile1)
Phone(Mobile2)
Voice Mail
Other
A call received at an extension via Extension Group cannot be
forwarded.
A call received by Hold Recall/Transfer Recall cannot be forwarded.
A call received from a doorphone cannot be forwarded. Refer to 3.11.1 Doorphone Call
A doorphone cannot be set as a forward destination. Refer to 3.11.1 Doorphone Call
A Paging feature number cannot be set as a forward destination.
An extension which has Extension Dial Lock set cannot change
FWD settings from a telephone. However, the FWD settings can
be changed through Web
Maintenance Console.
A different FWD No Answer time can be set for each Time Service
(Day /Lunch/Night) of an Extension/Extension Group.
If the transfer destination does not answer within the pre-
programmed time (
FWD No Answer Time ), either FWD NA or
Transfer Recall will operate. When the call is forwarded, you can
select whether to prioritize going to FWD NA or Transfer Recall.
Refer to 3.8.2 Call Transfer-
Unscreened
The FWD to trunk setting can be set independently for each
extension port. Do not set an outside telephone number as the FWD
destination, when the FWD to trunk setting is disabled. Programming Item List
2.3.1 PBX Configuration—[2-1]
Extension—Port—Main—Call
Forward to CO
3.1.9 Call Forwarding (FWD)
34 Feature Manual