Part names and
functions
A
D
C
E
B
Front cover
Mounting adaptor release lever
Mounting adaptor
M
N
Used to confirm the status of the
sensor or register the sensor to
the hub.
LED indicator
LED indicator
You can press
M
N
and check the
LED indicator to confirm the sensor’s
status. After confirming the sensor’s
status, we recommend turning the LED
indicator off by pressing
M
N
again
as soon as possible, otherwise battery
life may be reduced.
Indicator
Status
Green, lit
Door is closed
Red, lit
Door is open
Red,
blinking
Sensor is out of range
of the hub
Green,
blinking
slowly
Registration mode
(You pressed and held
M
N
)
Off
No battery power
Note:
R
The LED indicator does not indicate
sensor status if the sensor has not
been registered (page 10).
8
For assistance, please visit http://shop.panasonic.com/support
Setup
HNS107_(en_en)_0120_ver.101.pdf 8
2017/01/20 21:11:39
