Panasonic KX-HNK101C, Руководство по эксплуатации

Страница: 7 / 40

Part names and
functions
D
G
E
F
A
C
B
M N
Used when registering the keypad
to the hub.
Volume
Used to adjust the volume of the
sounds emitted by the keypad.
Speaker
Touchpanel
When no buttons are displayed
here, touch this area to display the
buttons.
Touchpanel buttons
LED indicator
DC jack
Touchpanel buttons
These buttons allow you to confirm and
change the system’s arm mode. During
normal operation, the button that
corresponds to the current arm mode is
lit by default, and all other buttons are
dimmed. When you tap the touchpanel,
the arm mode buttons light for 10
seconds. During this time, you can tap
an arm mode button to switch to the
corresponding arm mode.
Button Status
None
displayed No power, or buttons
are turned off
*1 .
, lit
Normal operation,
[Arm: At Home] mode
is selected.
, lit
Normal operation,
[Arm: Away] mode is
selected.
, lit
Normal operation,
[Disarm] mode is
selected.
Current arm
mode button
blinking slowly Alarm system was
triggered.
All buttons
blinking slowly Registration mode
(you pressed and held
M N )
*1 You can configure the keypad so
that its arm mode buttons do not
light during normal operation. For
more information, refer to the
User’s Guide (page 15).
For assistance, visit www.panasonic.ca/english/support 7
Setup
HNK101C_(en_en)_0804_ver.030.pdf 7 2015/08/04 21:00:13